金沙彩票投注

济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛

全国服务热线13335166268
0531-88602386
推荐产品
钣金加工-06

人 气:934

铜板铝板切割-01

人 气:491

激光切割加工-02

人 气:4225

您现在的位置:主页 > 金沙彩票投注 > 常见问答 >

影响激光切割精度的因素有哪些?

发表时间:2017-06-20 09:49  责任编辑:济南瑞福不锈钢有限公司  点击:

  在激光加工行业,要衡量金属激光切割和非金属激光切割的精度并非完全取决于激光切割机设备本身,实际上是由多方面因素组成。 而切割精度就是衡量机好坏的一个重要组成部分。有关这一点,专业从事切割加工的人士都知道。山东激光切割加工厂总结一下影响激光切割精度的有以下四大要素:

  In the laser processing industry, to measure the accuracy of metal laser cutting and non-metallic laser cutting does not depend entirely on the laser cutting machine itself, but in fact it is made up of many factors. Cutting accuracy is an important part of measuring the quality of a machine. About this point, professionals engaged in cutting processing know. Shandong cutting factory summed up the impact of laser cutting accuracy of the following four elements:

金沙彩票投注   1、JIGUANGGUANGSHUDEXINGZHUANG;JIGUANGQIFACHUDEGUANGSHUWEIZHUIXING,SUOYIQIECHULAIDEFENGXIYESHIZHUIXING,ZAIZHEIZHONGQINGKUANGXIA,HOUDU0.4MMDEBUXIUGANGJIUHUIBI3MMDEQIEFENGXIAODEDUO。YINCI,JIGUANGGUANGSHUDEXINGZHUANGQUJUEYUYINGXIANGJINSHUJIGUANGQIEGEJIQIEGEJINGDUDEYIDAYAOSU。ZAIZHEIZHONGZHUIXINGDEJIGUANGGUANGSHUTIAOJIANXIA,GONGJIANHOUDUYUEDA,JINGDUYEJIUHUIYUEDI,YINCIQIEFENGYUEDA。

  1. The shape of the laser beam; the beam emitted by the laser is tapered, so the slit is also tapered; in this case, the thickness of the 0.4MM stainless steel will be much smaller than the kerf of the 3MM. Therefore, the shape of laser beam depends on a major factor that affects the cutting accuracy of metal laser cutting machine. Under this kind of tapered laser beam, the greater the thickness of the workpiece is, the lower the accuracy will be, so the greater the kerf.

金沙彩票投注   2、JIGUANGGUANGSHUJUJIGUANGBANXIAOHUA;DANGZHUIXINGDEJIGUANGGUANGSHUJUJIZAIYIQIZHIHOU,CISHIDEHUIYUEBIANYUEXIAO,YINCIGAIJIGUANGQIEGEDEJINGDUYEBIANDEYUELAIYUEGAO,TEBIESHIQIEFENGDEFUMIANYEJIUBIANDEYUELAIYUEXIAO。ZAIZHEIGESHIHOUXIAODEGUANGBANKEYIDADAO0.01mm。ZHEIYESHIYINGXIANGJIGUANGQIEGEJIQIEGEJINGDUDEYAOSUZHIYI。

金沙彩票投注   2, laser beam spot aggregation minimization; when the beam cone together, this time will be smaller, so the precision of the laser cutting has become increasingly high, especially the slit width has become more and more small. At this time, the minimum spot can reach 0.01mm. This is also one of the factors that affect the cutting accuracy of laser cutting machine.

  3、GONGJIANCAIZHI;BUTONGCAIZHIDEQIEGEJINGDUYESHAOYOUBUTONG。JISHISHITONGYICAIZHI,RUGUOCAILIAODECHENGFENBUTONG,QIEGEDEJINGDUYEHUIYOUCHAYI。YINCI,GONGJIANCAIZHIDUIJIGUANGQIEGEJINGDUYEYOUDEYINGXIANG。

  3, workpiece material; different materials cutting accuracy is also slightly different. Even if the same material, if the material composition is different, the cutting accuracy will be different. Therefore, the workpiece material has a certain impact on the laser cutting accuracy.

  4、GONGZUOTAIDEJINGDU,RUOGONGZUOTAIJINGDUBUPINGHUOZHEQITAYUANYINYEHUIDAOZHIGAOJINGDUDEJIGUANGQIEGEXIAOGUO。

  4, the accuracy of the table, if the work table uneven or other reasons, also can lead to high-precision laser cutting effect.

同类文章:
  • 济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛_济南不锈钢工程