金沙彩票投注

济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛

全国服务热线13335166268
0531-88602386
推荐产品
钣金加工-06

人 气:934

铜板铝板切割-01

人 气:491

激光切割加工-02

人 气:4225

您现在的位置:主页 > 金沙彩票投注 > 行业资讯 >

影响济南激光切割过程中切不断的原因有哪些?

发表时间:2017-06-27 09:38  责任编辑:济南瑞福不锈钢有限公司  点击:

  激光切割机在激光切割过程中,辅助气体的气压对切割的结果有很大的影响。辅助气体必须要有足够的压力以便能够彻底清出切割产生的废渣,一般在切割厚一点的工件时气压要减小一点,粘到工件上的残渣将会破坏切割边缘。我们在使用激光切割机切割时,想要把切割的产品且到精确,那么我们就必须要先了解哪些方面会影响到切割的精度,下面济南激光切割加工金沙彩票投注小编就为大家简单的介绍下:

  In the cutting process of laser cutting machine, the pressure of auxiliary gas has a great influence on the result of cutting. The auxiliary gas must have enough pressure to completely clean out the waste from the cutting. Generally, when the workpiece is cut a little bit, the air pressure should be reduced a little, and the residue stuck to the workpiece will destroy the cutting edge. We use laser cutting machine, to cut products and to the most accurate, so we must first understand what aspects will affect the cutting precision, the Ji'nan laser cutting processing Xiaobian introduce:

金沙彩票投注   JIGUANGQIFACHUDEGUANGSHUWEIZHUIXING,SUOYIQIECHULAIDEFENGXIYESHIZHUIXING,ZAIZHEIZHONGQINGKUANGXIA,HOUDU0.4MMDEBUXIUGANGJIUHUIBI3MMDEQIEFENGXIAODEDUO。YINCI,JIGUANGGUANGSHUDEXINGZHUANGQUJUEYUYINGXIANGJINSHUJIGUANGQIEGEJIQIEGEJINGDUDEYIDAYAOSU。ZAIZHEIZHONGZHUIXINGDEJIGUANGGUANGSHUTIAOJIANXIA,GONGJIANHOUDUYUEDA,JINGDUYEJIUHUIYUEDI,YINCIQIEFENGYUEDA。

  The laser beam is tapered, so the slit is tapered, and in this case the stainless steel with a thickness of 0.4MM will be much smaller than the kerf of the 3MM. Therefore, the shape of laser beam depends on a major factor that affects the cutting accuracy of metal laser cutting machine. Under this kind of tapered laser beam, the greater the thickness of the workpiece is, the lower the accuracy will be, so the greater the kerf.

  1、GONGZUOTAIDEJINGDU,RUOGONGZUOTAIJINGDUBUPINGHUOZHEQITAYUANYINYEHUIDAOZHIGAOJINGDUDEJIGUANGQIEGEXIAOGUO。

  1, the accuracy of the table, if the work table uneven or other reasons, also can lead to high-precision laser cutting effect.

  2、DANGZHUIXINGDEJIGUANGGUANGSHUJUJIZAIYIQIZHIHOU,CISHIDEHUIYUEBIANYUEXIAO,YINCIGAIJIGUANGQIEGEDEJINGDUYEBIANDEYUELAIYUEGAO,TEBIESHIQIEFENGDEFUMIANYEJIUBIANDEYUELAIYUEXIAO。ZAIZHEIGESHIHOUXIAODEGUANGBANKEYIDADAO0.01mm。ZHEIYESHIYINGXIANGJIGUANGQIEGEJIQIEGEJINGDUDEYAOSUZHIYI。

金沙彩票投注   2, when the tapered laser beam is gathered together, the time becomes smaller and smaller, so the laser cutting accuracy becomes higher and higher, especially the width of the kerf becomes smaller and smaller. At this time, the minimum spot can reach 0.01mm. This is also one of the factors that affect the cutting accuracy of laser cutting machine.

同类文章:
  • 济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛_济南不锈钢工程